Manual

Erasing All Lear

ned Commands fr

One Component

STEP1 Press the [COMPONENT] and [INPUT] buttons simul-

taneously for 3 seconds until the Component LED

light turns on.

STEP2 Press and hold both the [COMPONENT] button you

want to erase and the [PAUSE] button for 5 seconds.

The Component LED will blink twice to confirm the

erasure.

STEP3 To exit, press and hold both the [COMPONENT] and

[INPUT] buttons simultaneously until the Component

LED blinks 3 times.

H. Pr

ogramming the All Of

f Button

This allows you to program the All Off button so it can send up

to three power On/Off commands with one button press.

STEP1 Press the [CBL] button.

STEP2 Press the [All OFF] button and the [OK/SEL] button

simultaneously for 3 seconds. The [CBL] button will

turn on for 30 seconds.

STEP3 Press the first [COMPONENT] button you want to

store in the [ALL OFF] button and then the [POWER]

button. Repeat this for other Components until you

have stored all the desired power commands into the

[ALL OFF] button.

STEP4 Press the [CH+] button to save the power commands

you stored. The [CBL] button will blink twice to con-

firm the commands have been saved.

I. Pr

ogramming for Advanced Functions.

If your remote model has custom-programmable Macro but-

tons available, they can be programmed to act as a ‘Macro’ or

Favorite Channel button in CABLE mode. This allows you to pro-

gram up to five 2-digit channels, four 3-digit channels or three 4-

digit channels that can be accessed With one button press.