Manual

MRF-260 BASE ST

ATION

age 10

Programming For Multiple Equipment Locations

You can operate up to 15 different equipment locations, each with

an MRF-260 assigned a unique Receiver ID#. You program each of

your remotes to talk to the equipment locations you want by assign-

ing each of your devices to a receiver. First, you must add and

name your receivers for the locations they are placed in:

Step 1 - Open the RF Setup Window

The RF Setup window opens after selecting RF Control from the

Program Menu or RF Settings from the Main Menu of ProWizard.

Step 2 - Reveal the Receiver settings

Extend the RF Setup window by clicking on the Receivers button of

the RF setup window.

Step 3 - Add, Name and Assign Receiver ID#

Using the controls at the bottom extended portion of the RF Control

window, add new receivers and rename them for the equipment

location.

Step 4 - Save and Download to your

remote.

You may rename the Default

receiver to something more

descriptive by clicking on

the Rename button.

Add new receivers by click-

ing on the Add button.

Delete receivers by selecting them

first by clicking on their Name,

then clicking the Delete button.

Assign the correct Receiver ID# for

each LOCATION by clicking on the

desired CELL and selecting the ID#

you want from the pull down list.

Each LOCATION should have a

unique ID#. It is ok to install multi-

ple MRF-260’s in one location.