Owner’s Manual MRX-10 Advanced Network System Controller
MRX-10 Owner’s Manual ©2010-2013 Universal Remote Control, Inc. The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this Owner’s Manual may be subject to change without prior notice.
TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Parts Guide 1 Front Panel Descriptions 2 Rear Panel Descriptions 3 Specifications 4 Limited Warranty Statement 5 End User Agreement 7 Federal Communication Commission Interference Statement 8 Regulatory Information to the user 9 Declaration of Conformity 10
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Introduction The MRX-10 Advanced Network System Controller controls all MRX series connected devices throughout the entire home. Press a button on a Total Control remote or keypad to issue a command from the MRX-10 to turn off the lights in every room all while watching a movie. View the artist name, song title and album art your child is listening to in their room from a Total Control remote or keypad.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Front Panel Descriptions The front panel consists of 2 indicator lights which will illuminate when in use. Power LED Ethernet LED Total Control llumination Reset Power LED: Indicates that the MRX-10 is powered on when lit. Ethernet LED: Indicates the network connectivity status of the MRX10. On=Connected, Off=not connected, Blinking=attempting to connect. Total Control Illumination: Attractive, adjustable accent lighting.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Rear Panel Descriptions The rear panel ports are: LAN DC 12V Power IR Outputs: #1-8 URC USB RS-232 Ports Sensors Relay: NO, NC, COM 12V Out RFTX-1 Trigger In DC 12V Power: Attach the included 12V DC 3.5A power supply here. LAN Connection: RJ45 standard 10/100 Ethernet connection to the local network. URC USB Port: USB port for future expansion. IR Outputs: Eight standard 3.5mm IR emitter ports with individual output level adjustment screws.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Specifications Input l l l l l l & Outputs: 12V/.2A: Two (Programmable) IR: Eight adjustable output USB: One (for future use) Ethernet: One 10/100 RJ45 port (Indicator 2LED) RS-232: Four, supporting TX, RX and GND Sensor: Four, supporting Video or Voltage sensing (requires URC sensors) l Relays: NO, NC or COM RF: l l l l l Frequency: 2.4GHz (Two-way RF) Range: 50 to 100 feet, depending upon the environment Power Supply: 12v DC 3.5A External Power Supply Size: 1.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER URC’s PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Regulatory Information to the user n CE Conformity Notice Products with “CE” marking comply with the R&TTE Directive 1995/5/EC, EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EEC issued by the commission of the European Community.
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER Declaration of Conformity Company Name : Universal Remote Control Inc. Company Address : Contact Info rmation : 500Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.
NOTE Page 11
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
