User guide

Page 13
TKP-7000
Initial View (Room Monitoring)
When the Rooms Menu opens up, the room list populates with all
of the rooms in the Total Control project. Each room displays its
status so the user can visually see what is “going on” in that room.
The Exit button will return the user to the previous screen.
Selecting a Room (Room Control)
Selecting any room from the room list will allow the TKP-7000 to
control that room, as if it were physically in that room.
Returning the keypad to control the room where it is physically
located requires accessing the Rooms Menu and selecting the
appropriate room.