User guide

TKP-7000
Installing the TKP-7000
The TKP-7000 is wall-mountable and fits easily into a dual-gang
opening. Prior to installation, make sure power is available at the
preferred location.
Power can be supplied to the TKP-7000 in any of the following
ways:
= An Ethernet cable connected to a PoE (power over ethernet)
router/switch
= An Ethernet cable connected to a PoE (power over ethernet)
injector
Power over Ethernet or PoE technology describes a system to pass
electrical power safely, along with data, on Ethernet cabling. The
IEEE standard for PoE requires Category 5 cable or higher for high
power levels.
Page 3