Owner manual

2
Button Functions
3
Programming the Remote Control.
4
A. Quick Set-Up Method
A. Quick Set-Up Method
STEP1
Turn on the component you want to program. To
program your TV, turn on the TV.
STEP2
Press and hold the [DEVICE] key for 5 seconds until
the Device LED will blink once and stays on.
Continue to hold the [DEVICE] key and press the
*Note : In this section, when you are instructed to press a
[DEVICE] button, that means you should press either
the CBL, TV, or DVD button, depending on which
device you are programming the remote to operate.