Owner`s manual

Page 23
Audio Inputs - Hardware Connections
Audio Input Connection – HDMI
Although an HDMI connection carries both audio and video, the DMS-AV can
process audio and video separately (please see the menu structure for further
information). To connect an HDMI audio source to the DMS-AV, connect the
HDMI cable to the HDMI output on the source. Then connect the other end of
the cable into the corresponding HDMI input on the DMS-AV.
Audio Input Connection - Optical Digital
The DMS-AV provides two optical digital audio inputs. These inputs may be
used to receive an optical digital audio signal from a source connected to the
DMS-AV. Connect the optical digital audio output on the source using an
optical cable to the desired optical digital audio input on the DMS-AV. Shown
is an optical digital audio source connected to the optical digital audio IN A.
Audio Input Connection - Coax Digital
The DMS-AV provides two coaxial digital audio inputs. These inputs may be
used to receive an coaxial digital audio signal from a source connected to the
DMS-AV. Connect the coaxial digital audio output on the source using a coax cable
to the desired coaxial digital audio input on the DMS-AV. Shown below is a coaxial
digital audio source connected to the coaxial digital audio IN C.
Audio Input Connection - Stereo Analog
The DMS-AV provides seven pairs of stereo analog audio inputs. Six pairs of
analog inputs accept a line level audio signal. One pair of analog inputs
accepts a phono (MM) level audio input. A ground lug for the phono input is
also provided. Any of these seven inputs may be set to become a network
multicast “streaming” source, that can be shared with any URC DMS Amplifier.
The DMS-AV can create a maximum of two multicast streams. These inputs
may be used to receive a stereo analog audio signal from a source to the DMS-
AV. Connect the stereo analog audio output
on the source using a RCA cable to
the analog stereo audio input on the
URC. Shown is a stereo analog audio
source going into the stereo analog
audio inputt IN 1.
DMS-AV HOME THEATER AMPLIFIER
Connection to
coaxial digital audio source
Connection to optical dig
audio source
Connection to optical digital audio source
Connection to coaxial digital audio source
Connection to analog signal source