Installation manual

Page 2

MRX-1 BASE STATION

Features and Benefits

The Bridge for Network Remotes and Keypads

The MRX-1 enables IR and RS-232 devices to be controlled by URC

Network Controls.

2-Way RS-232 Thermostats, Security Systems, Home Theater AVRS

and Multi-Zone Matrixes

Via the unique URC 2-Way database installers can drag and drop

2-Way pre-programmed modules into any URC Network Control

can display Volume Pop Ups, Status displays, Tuner Modules, 2-

Way Transport Controls, etc.

Whole House URC Lighting via RFTX-1

Via the RFTX-1 transmitter, the MRX-1 can relay commands from

any URC Network Control to URC Lighting devices. By installing

multiple MRX-1/RFTX-1 relay stations around a home, installers can

create seamless coverage of any size house, allowing lighting paths

and whole house scenes.

Utilize MRX-1 Sensor Port to Automate TOAD Devices

The MRX-1 offers URC Network Controls automation capability for

devices that do not have discrete codes. It is equipped with a sen-

sor port compatible with optional URC video or voltage sensors,

thus an installer can program macros that test whether a device is

on or off before issuing input commands etc.

Control Devices with Relays

URC Network Controls can control lifts, screens etc. via the MRX-

1’s NO, NC or Momentary set of contacts.

Traditional Narrow Band RF

Complete Control remotes and keypads can also control the same

IR devices with an optional RFX-250 or RFX-250i.

Parts Guide

The MRX-1 Network Base Station includes:

1 - MRX-1 Network Base Station

1 - 12V-1000mA Power Supply

6 - Visible Emitters with 10 foot plug

in cables including 1 pink sleeved

emitter for the RFTX-1 port

1 - Two Meter 3.5mm Stereo to

3.5mm Stereo (for daisy chaining

multiple MRX-1 with one RFX-

250)

1 - Adjustment Tool

1 - Mounting Plate for wall mounting

the MRX-1