Installation manual

Integrating Optional RFTX-1 to control URC Lighting
RFTX-1
The RFTX-1 provides control of the URC Lighting
1. Simply plug the RFTX-1 with the 10’ pink connecting cable
(included with the RFTX-1) into the MRX-1 pink fixed port #6.
2. Set the RFTX-1 to either 418MHz or 433MHz.
3. Set the URC Lighting Device in the CCP Editor to Network and
set the IR output to Port #6.
4. Download to the MX remote and begin controlling your lights.
Page 6
MRX-1 BASE STATION
Select either
418MHz or
433MHz