Operating Your System With The MX-5000 Two Way Touch Screen
This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
MX-5000 TWO WAY TOUCH SCREEN Table of Contents Congratulations 1 Connecting the Battery Pack 2 Using the Charging Base 2 Two Way via Wi-Fi 2 Optional RF “No Rules” Operation 3 Operating Your System 4 Using Two Way Personal Server Features 5 Revolutionary New iPod Controls 6 Displaying the Settings Screen 9 Sleep Settings 9 Network 9 Brightness 10 System 10 Button Light 10 Power Settings 10 Calibration 11 Date and Time 11 Sound 11 Pickup Settings 11 Factory Default 11
MX-5000 TWO WAY TOUCH SCREEN Congratulations You’ve purchased a unique synthesis of hardware and software engineering, the Complete Control MX-5000. The twin goals of the design team were to improve the elegance and usability of touch screens through the physical design while providing a new standard in brightness, clarity and animation for the touch screen itself.
MX-5000 TWO WAY TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the MX-5000. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-5000. The battery will snap into place when aligned properly. Replace the cover and snap it into place.
MX-5000 TWO WAY TOUCH SCREEN Optional RF “No Rules” Operation In combination with an MSC-400 Master System Controller, or an RF Base Station, the MX-5000 can control your system without being in line-of-sight of the equipment. The MSC-400 enhances the capabilities of the MX-5000 by storing and issuing Smart Macros to your main system components. It is triggered by RF Smart Macro commands via RF (radio frequency).
MX-5000 TWO WAY TOUCH SCREEN Operating Your System The MX-5000’s main pages display the activities and devices in your system. Press the main page button to see what your choices are. Large systems may have more than one page. Press either of the Page buttons if you don’t see all your devices. Gently press any screen button with your finger to select an activity or a device. The screen will change to a display of the buttons you need for that activity/device.
MX-5000 TWO WAY TOUCH SCREEN Using Two Way Personal Server Features Step 1 – Insert an iPod into the PSX. The Universal Remote Control screen appears on the iPod. This means it’s connected to the dock and ready for use with the MX-5000 remote control. Step 2 – Select the dock you want to listen to from the Main page of your MX-5000. Step 3 – If the system has just been turned on, you may see the message, “Connecting to iPod Dock”.
MX-5000 TWO WAY TOUCH SCREEN Revolutionary New iPod Controls The heart of your new personal server experience is found on your MX-5000 by pressing the Controls button. This reveals the unique personal server features only found on the MX-5000. The Page button is now labeled Controls and always accesses the unique iPod Controls screen. Once the Controls screen appears, simply tap the feature you want: Shuffle exactly what you want (this album, this artist, this genre, etc.
MX-5000 TWO WAY TOUCH SCREEN Shuffle: The “Shuffle” screen enables you to easily shuffle just what you want. The currently playing album, artist, genre or playlist, or scroll the list to reveal new revolutionary shuffle options. You can choose to shuffle any artist, any album, any genre, or even any composer. For example, at the bottom of the list, select Another Genre, then select Jazz to Shuffle just your Jazz music.
MX-5000 TWO WAY TOUCH SCREEN Using the Alpha Search Feature: The “search” button appears in the center of the bottom of the screen whenever you are browsing lists of artists, albums, songs, or playlists. Simply click on Search, and an alphabetical keyboard appears. Type in as many characters as you like and touch “Go”. The Music Search screen will appear. Select the category you’d like to search. The Left Page button (now labeled “Go Back”) takes you back to the last list you were browsing.
MX-5000 TWO WAY TOUCH SCREEN Displaying the Settings Screen You can adjust the settings of the MX-5000 whenever you like by pressing and holding the main + OK button for three seconds. When you do, the screen will change to the Settings screen. If you do not press any button on the Settings screen within 30 seconds, the MX-5000 will time out and automatically return to normal operation. Page 2 of the Settings Screen Page buttons reveal the rest of the settings. There are two pages of Settings screen.
MX-5000 TWO WAY TOUCH SCREEN Brightness Adjust the screen brightness by moving the slider. Min is the dimmest setting and Max is the brightest setting. System The System Information screen displays data about your MX-5000's operating system, memory etc. Button Light You can adjust the brightness of the LEDs that backlight the buttons of the MX-5000. Move the slider to the left to dim the backlighting and move it to the right to brighten the backlighting.
MX-5000 TWO WAY TOUCH SCREEN Calibration If you like, you can calibrate where you tap by running the calibration. You will need a pen top or PDA stylus to do this. Do not attempt to calibrate using your fingers. Date and Time Your MX-5000 may have been programmed to display the date or time on the touch screen. If you need to, you can adjust the time displayed by changing the settings on this screen.
MX-5000 TWO WAY TOUCH SCREEN Maintaining Your MX-5000 Be careful not to scratch the touch screen, only use your finger to tap the LCD touch screen or use a plastic pen top or PDA stylus. Never use a real pen, pencil or any other sharp object on the screen. Keep it away from extreme cold or heat. The MX-5000 is not waterproof. Do not use it in any location that is damp or wet. If you spill water on it, take out the battery pack and let the MX-5000 dry for 48 hours before you try powering it up again.
MX-5000 TWO WAY TOUCH SCREEN Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
MX-5000 TWO WAY TOUCH SCREEN SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
MX-6000 TWO WAY TOUCH SCREEN equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
MX-5000 TWO WAY TOUCH SCREEN Specifications Microprocessor: 533MHz ARM9 RAM: 128Mbyte Mobile DDR NAND: 64Mbyte LCD: 2.8 Inch Screen (240 by 320) LCD Backlighting by LED Sound: mono 1 watt USB: 2.
MX-5000 TWO WAY TOUCH SCREEN Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MX-5000 TWO WAY TOUCH SCREEN Precautions and Information Concerning Rechargeable Lithium-Ion Batteries u If you will not be using your remote control for an extended period of time, be sure to remove the battery u Do not attempt to disassemble, alter or apply heat to the battery. u Use care to avoid dropping the battery or subjecting it to severe impact that could damage the case. u The battery should not be immersed in water. u Risk of explosion if battery is replaced by an incorrect type.
NOTE Page 19
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.