Installation manual

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1
8
Configuring PSX in MX-6000 Editor:
In Program Step 1, “Create and Name Devices", use the drop-down menu to
navigate to “Two-Way” devices. Then, Click on the PSX icon in the icon window
and drag it onto the MX-6000 “Main Page”.
Once a PSX is created as a device, all you have to do is configure the
“Network Settings” in the “Properties Tab” of the device.
Step 1 - Click on the PSX Device in the “Model Designer” tree view and then click
on the “Properties Tab” in the tabbed window at the right.