Specifications
16
SIRENS  by Tomar Electronics 
Multisound Siren Module Standard Rotary Switch Single Tone Selection Chart  RJ45-6 Remote Control Cable Selections
Switch Selection    Operation        Remote Control  Operation    Priority
  0    Selects Remote Control Operation    Orange Wire  Horn - Steady    1
  1    8 Tone Parade Sequence      Black Wire   Two-Tone - Alternating   2
  2    Wail - Conventional Siren      Red Wire    Yelp - Rapid Siren    3 
  3    Yelp - Rapid Siren        Gray Wire    Wail - Conventional Siren  4 
 4  Two-Tone - Alternating  
  5    Whoop - Ascending Low-High       
  6    Yeow - Descending High-Low
  7    Horn - Steady
  8    Beep - Slow Intermittent Horn
  9    Stutter - Rapid Intermittent Horn     
POWER ALARM® PROGRAMMABLE 
MULTI-SOUND INDUSTRIAL SIGNALS
The POWER ALARM® siren is a heavy duty industrial audible 
alarm designed to operate under adverse industrial conditions 
such as shock, vibration, or transient voltage surges. 
The models 1000 and 1100 POWER ALARMS are supplied with 
a plug-in single channel programmable sound module that generates 
8 different rotary switch selectable sounds plus 4 additional sounds that 
can be selected remotely by customer switch. Remote feature requires RJ45-6 
remote control cable. See chart below for details.
• 120 db at 4 ft. 
• NEMA 4 circuitry enclosure.
• 100% all metal speaker, weatherproof construction.
• Speaker and plug-in programmable sound module included.
• -55 to + 60 degree C temperature range.
8" tall X 6" wide X 3" D enclosure
10 1/2" L X 19 1/2" tall X 10" W speaker, 15 lbs. Total.
Model Number  Voltage/Amps   
1000-120   120/240 AC, .5/.25 
1100-12/24  12/24 DC, 0.7 
1100-250   250 DC, 0.25 
PARTS & ACCESSORIES ("/" factory installed options)
MULTISOUND Multi-Sound plug-in module
1001  Speaker
1000-PCB 120 VAC printed circuit board
1100-PCB 250 VDC printed circuit board
1100-PCB-12/24 12/24 VDC printed circuit board
/SSA  NEMA 4 stainless steel enclosure
RJ45-6 Remote Control Cable
EXPLOSION PROOF POWER ALARM®    
PROGRAMMABLE MULTI-SOUND SIGNAL
The single sound channel EXPLOSION PROOF POWER ALARM® is a solid   
state audible device with a hard wired single channel programmable sound   
module that generates 8 different rotary switch selectable sounds plus 4 additional 
sounds that can be selected remotely by customer switch. Remote feature requires 
RJ45-6 remote control cable. See chart below for details.
 UL listed for Class I, Groups C & D. Class I, Div. 2, Groups A, B,. C & D. Class II, 
Div. 2, Groups F & G. Gasketed for outdoor application.
Features include:
• 117 db at 4 ft, 109 db at 10 ft.           
• 120 X 60 degree sound dispersion.
• Weatherproof construction, berglas horn & cast aluminum housing
• -55 to + 85 degree C temperature range
• NEMA 4X Marine rating.
14"W X 6"Tall X 17 1/2"L, 24 lbs.
Model Number  Voltage/Amps
1002WEP-120  120 VAC, 0.2
1002WEP-240  240 VAC, 0.1
1002WEP-24  24 VDC, 0.8
1001-WEP  EP Speaker w/o circuitry
RJ45-6    Remote Control Cable
144534_Body r7.indd 16 11/8/11 1:53 PM










