Specifications

44
STROBE POWER SUPPLIES - two outlets
ORDERING INFORMATION
772P-1228 Strobe Power Supply
The model 772P is an economical remote strobe power supply
designed to alternately ash two remote strobe heads at a rate of 70
double flashes per minute each. The unit is small for easy mounting
in hard to t areas. The 772P is fully potted making it vibration and
water resistant. For 100% weatherproof application specify -WP
weatherproof connectors. The unit features polarity protection,
continuous duty circuitry and RFI lters. The 772P operates from
12-28 DC and is fully protected against shorts or opens in the lamp
wiring. The power supply is constructed with a glass filled Lexan
case and polyurethane potting.
772P-1228 2 Lamp, 45 Watts, DF, 12-28 DC
772P-1228-WP 2 Lamp, 45 Watts, DF, 12-28 DC, WP Connectors
Power Requirements:
Draws 4.25 amps avg. @ 12 DC tapering to 2.125 amps avg. @ 24 DC
Output Power Rating:
45 Watts Minimum
Flash Rate:
70 DFPM/Head Minimum
Size:
7.125" (181 mm) X 3.75" (44 mm)
Weight:
2.5 lbs (1.12 kg)
Warranty:
Five year warranty
400-1228/401-1228 Mini NEOBE Power Supply
The model 400 is a low cost remote NEOBE power supply designed to
alternately ash any two remote strobe heads at a rate of 60 bursts per
minute each. The unit is a tiny 2" X 3" X 1.5" for easy mounting in any
area. The 400 is fully potted making it vibration and water resistant. For
100% weatherproof application specify -WP weatherproof connectors.
The unit features polarity protection, continuous duty circuitry, and RFI
lters. The 400 operates on 12 thru 28 DC and is fully protected against
short or opens in the lamp wiring.
ORDERING INFORMATION
400-1228 2 Lamp, 20 Watts, 12-28 DC
400-1228-WP 2 Lamp, 20 Watts, 12-28 DC, WP Connectors
401-1228 1 Lamp, 20 Watts, 12-28 DC
401-1228-WP 1 Lamp, 20 Watts, 12-28 DC, WP Connectors
401-CF-1228 1 Lamp, 20 Watts, 12-28 DC Continuous Flash
401-CF-1228-WP 1 Lamp, 20 Watts, 12-28 DC, CF, WP Connectors
SPECIFICATIONS
Power Requirements
Draws 1.85 amps avg. @ 12 DC tapering to 0.9 amps avg. @ 24 DC
Output Power Rating:
20 Watts Minimum
Flash Rate:
60 Bursts per minute/Head, 6 Flashes per burst
Construction:
ABS Case, Polyurethane Potting
Size:
2" (50mm) X 3" (76.2mm) X 1.5" (38mm)
Weight:
0.6 lbs (276mm)
Mounting Holes:
2 Holes, 0.187" Dia. (4.75mm) on 2" (50mm) Centers
SPECIFICATIONS
by Tomar Electronics
144534_Body r7.indd 44 11/8/11 1:54 PM