Specifications

ManualsBrandsUniversal Remote Control ManualsRemote ControlR7 - SPECS SHEET

STROBE POWER SUPPLIES - four & six outletsby Tomar Electronics

ORDERING INFORMATION

770P-1228 Strobe Power Supply

The model 770P remote strobe power supply is designed to

alternately ﬂash two groups of remote strobe heads in either high or

low intensity and normal or pursuit ash rate. The 770P is con-

trolled manually by 4 customer provided SPST low current switches

which select low-high intensity, ﬂash rate, lamp group 1 on-off

control and lamp group 2 on-off control. All functions may be wired

to allow control by a single low current switch if desired. The 770P

operates from 12-28 DC and is fully potted making it vibration and

water resistant. For 100% weatherproof applications specify the -

WP weather proof connectors. It also features polarity protection,

heavy duty precision circuitry and RFI ﬁlters. The power supply is

constructed with a glass ﬁlled Lexan case and polyurethane potting.

770P-1228 4 Lamp, 65 Watts, with head cut-out circuitry,

intensity control, normal and pursuit ﬂash rates,

12-28 DC

770P-1228-WP Same as above with -WP Connectors

Power Requirements:

Draws 6.0 amps avg. @ 12 DC tapering to 3.0 amps avg. @ 24 DC

Output Power Rating:

65 Watts Minimum in High Intensity

NORMAL Flash Rate, 2 Groups Running

Flash Rate:

NORMAL rate 70 DFPM/Head Minimum (140 FPM Total)

Pursuit rate 170 DFPM/Head Minimum (340 FPM Total)

Control Features:

On-Off and all features are controlled by switching positive, low battery

voltage. The main battery power may be left connected to the supply at

all times. Current draw is less than 100 microamps in standby.

Size:

7.125" (181mm) X 3.75" (95)mm) X 2.50" (64mm)

Weight:

3.5 lbs (1.56 kg)

Warranty:

Five Year Warranty

776-1228 Strobe Power Supply

The model 776 remote strobe power supply is designed to alternately

ﬂash two groups of remote strobe heads in either high or low intensity

and normal or pursuit ash rate. The 776 is controlled manually by 4

customer provided SPST low current switches which select low-high

intensity, ash rate, lamp group 1 on-off control and lamp group 2 on-

off control. All functions may be wired to allow control by a single low

current switch if desired. The 776 operates from 12-28 DC and is fully

potted making it vibration and water resistant. For 100% weatherproof

applications specify the -WP weather proof connectors. It also features

polarity protection, heavy duty precision circuitry and RFI ﬁlters. The

power supply is constructed with a glass ﬁlled Lexan case and polyure-

thane potting.