Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
36
APPENDIX C: OSD MENU STRUCTURE & COMMANDS
Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual
Display Setup Menu
Note:
PSI VERSION is for documentation
reference only and cannot be changed.
Use the display setup menu to customize the way the
display system functions.
FREEZE, INSTANT ON, and OSD BACKGROUND
can either be set to ON or OFF.
RESTORE FACTORY SETTINGS: All parameters
stored in the unit will be replaced, and any setup that
has been saved will be erased and replaced.
The rest of the options in this menu are sub menus
discussed in the tables below.
Color Gamma Menu
The color gamma menu is used to adjust color
temperature. Adjustments in this menu are
complicated because of interrelationships with other
menus.
The red, green and blue gamma settings
independently vary the shapes of their gamma curves.
The red, green, and blue factors vary the maximum
levels of the respective colors.
Use the up or down arrows to select and change
settings from the factory default.
Input Ports Enabled Menu
Use this menu to turn any particular input on or off.
Some of the inputs can not be used simultaneously
with others. For example, YPbPr.1 with composite
inputs Y, R, or W.
All inputs can either be ON or OFF. If the input is
off, the unit will not display any menus for that
input.
If the application turns an input off and the unit is
currently displaying that input, the change will not take
effect until the application changes to another input for
viewing.
Use the up or down arrows to select and change
settings from the factory default.