TKP-7600 Owner’s Manual
Table of Contents Introducing the TKP-7600 Thank you for purchasing URC’s TKP-7600 In-Wall Network Keypad. Its easy and intuitive use helps to simplify your life while adding control of more things than thought possible. Features and Benefits..........................................................................................1 Online Help: Parts List.................................................................................................................
Features and Benefits: The TKP-7600 In-Wall Network Keypad is one of URC’s most advanced devices that is optimized for usage with Total Control 2.0. Enjoy these key features: Updated User Experience: This device has the capability of using URC’s Total Control 2.0 software suite. Using this software provides this device with a modern “look and feel” giving the end-user an improved user experience in terms of graphics, performance, and features.
Proximity Sensor: This feature allows the TKP-7600 to spring into action automatically. Utilizing its proximity sensor, the keypad can detect distances from up to three (3) feet away. This setting can be adjusted in the device’s Settings menu. Flexible Orientation: The TKP-7600 offers the ability to display the device in either portrait or landscape mode making it the perfect keypad for almost any room. This feature can only be set from within the Accelerator 2.
Part List: Included in the TKP-7600: 1x - TKP-7600 Network Keypad 4x - Mounting Screws 1x - Mounting Ring 4x - Spacers TKP-7600 Mounting Ring Spacers Mounting Screws 3
Installation: The TKP-7600 is wall mountable and fits into a standard dual gang (J-box or Mud Ring) opening. Prior to installation, make sure power is available at the preferred location. Power can be supplied to the TKP-7600 through an Ethernet (RJ45) cable connected to a PoE (Power over Ethernet) in either of the following ways: ● Router/Switch ● PoE Injector Power over Ethernet describes a system that passes electrical power safely, along with data, along Ethernet cabling.
Wall Mounting: Follow the steps below for installation: 1. Assure the dual-gang opening is fitted with the standard two-gang retro-box (available at almost any electronic supplier). Dual-Gang Box Mounting Ring 2. Mount the wall-plate to the two-gang retro-box. TKP-7600 3. Connect the Ethernet cable to the rear of the supplied TKP-7600. 4. The TKP-7600 easily snaps into the wall-plate. The keypad mount rotates to accommodate landscape or portrait viewing modes.
Main Menu Navigation: 2 Although specific screen design and certain options are dictated by the custom integrator that programmed the Total Control 2.0 system, the general layout remains the same. 7 Actual navigation is performed via screen swipes: ● Left Swipe: Swipe left to reveal additional Main Menu pages. The amount of pages available on the Main Menu is dictated by the custom integrator. 1 ● Right Swipe: Swipe right to reveal the Scenes Menu.
Ribbon View (Landscape & Portrait): Main Menu: View Modes Total Control 2.0 features two different view modes for the TKP7600. Each view mode has its own unique properties that compliment the user experience. The view mode must be programmed from within the Accelerator 2.0 software, speak to a custom home integrator for more details. 1. Ribbon View: This is the default view mode and it contains up to six (6) items per page. Grid View (Landscape & Portrait): 2.
Title Bar: The Title Bar is always present regardless of what menu and/or room the TKP-7600 is currently using. On the left of the Title Bar, the current room the TKP-7600 is controlling is displayed. Selecting it reveals the Rooms Menu. Now Playing Current Room At the right of the Title Bar is the Now Playing area. This displays which device/activity is currently active. Selecting it returns the interface to the device/activity’s menu for control.
Room’s Menu: Tap on the Room Name located on the left in the Title Bar to display the Room’s Menu. The Room’s Menu contains every room programmed into the system. Specific rooms may be hidden from certain interfaces, speak to the custom home integrator for that option. Each room is given a Room Name and customized image to represent that room. Additionally, the Room’s Menu can be used for controlling volume, turning off the lights, or completely powering off a specific room.
Room Linking: Remember, Room Linking can only be used by DMS Zones/Areas. The following steps take place from within the Room’s Menu: 1. Select the Room Link button, this displays the Room Linking Menu. 2. Select which rooms in the system to link. Only rooms that are DMS Zones/Areas appear on the Room Linking Menu. 3. Select the Check to confirm. These rooms are now linked. It is possible to control volume on all of these rooms from one menu (see below).
Now Playing: On the right hand side of the Title Bar is the Now Playing area. The Now Playing area always dictates what activity is currently playing in the room. In the example at the right, Now Playing reads “SNP-2 Pandora”. This means that in the Home Theater the SNP-2 is using Pandora currently. Tapping the Now Playing area jumps the TKP-7600 to the menu for the device in that section. In the example this mean that, once tapped, the interface jumps to the SNP-2 device menu for control.
Core Buttons: These buttons are almost always on display. Each one of these buttons has a specific function: 1. Volume: Used to control an active audio device. 2. Shortcut Popup: Use this to display the Shortcut Popup Menu. This menu contains up to six (6) current room activities. 3. Main: Select this to return to the Main Menu regardless of what menu the interface is currently in use. 4. Room Off: Use this button to turn off the current room.
Shortcut Popup Menu: The Shortcut Popup Menu can holds the end-user’s favorite or most frequently used devices/activities and places them in one easy to access location. 1 Adding Shortcuts: Follow these steps to add a Shortcut: 1. Locate an available button and hold it down until the status bar on the top of the display fills. As stated on the bottom of the interface “Press and Hold to Add or Remove”. A list of device/activities for that room a presented in the Add a Shortcut Menu. 2 2.
1 Just tap on a Shortcut button to launch that device/activity. Remember, this menu can only hold up to six (6) items and each item must already be a device/activity programmed into that current room. Removing Shortcuts: Follow these steps to remove a Shortcut: 1. From the Shortcut Popup Menu, press and hold the Shortcut that needs to be deleted. 2. Hold the button until the Remote a Shortcut window displays. 3. Select Remove.
Status Bar: Located above the Core Buttons, this section of the interface is almost always on display. The Status Bar is designed to inform the end-user of various different customizable options: 1. Metadata Information: Located to the far left, options selected from the programming software cycle through here. Those selections are the following: ● Room Linked Status: Whenever the chosen room/area is “linked” to other rooms, it is acknowledged in this section.
2. Page Indicator: The icons here represent the current page number the interface is on. However, the icon located to the left is the Scenes Menu icon. All icons to the right of that represent page numbers. 3. Time: This is always present on the right hand side of the interface. It serves as a quick and convenient place for the end-user to check the time of day.
Intercom: The TKP-7600 has the capability of communicating across the home network to any Intercom-Enabled client (interface). There are three (3) different types of intercom calls that can be made: 1. Audio-Video: This type of call uses the camera and microphone of the calling and receiving client to provide auditory and visual feedback. 1 2. Audio Call: This type of call only uses the built in microphone of the calling and receiving client to create an audio call over the home network. 3.
4. Audio Broadcast Call: This type of call is audio communication between two or more clients. An ideal way to communicated across multiple Intercom-Enabled interfaces in almost any home.
Navigating the Intercom Menu: As mentioned on page 8 of this document, accessing the Intercom button is performed by swiping down on the Title Bar. After selecting the Intercom button from the Title Bar Menu, the Intercom Menu displays. This menu presents the end-user with useful information: 1. Door Station Integration: In the case where a 3rd party door station has been integrated with the Total Control 2.0 system, those device are located at the top of the Intercom Menu. 2.
1 Making Calls: Audio-Video Remember that the Intercom feature must be enabled from with in the Settings Menu. The following steps take place from the Intercom Menu, to access this menu refer to page 8: 1. Select an available client from the Intercom Menu. After selecting a client, the three (3) call options are displayed. This is almost always displayed after selecting an available client. 2 2. Select Audio & Video Call.
Volume Slider Once the call is accepted, the TKP-7600 provides auditory and visual two-way feedback on the screen. Use the Volume Slider at the right of the video feedback to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it down to the bottom to mute the audio. To end an Audio & Video call, select the End Call button (see image at right). This immediately ends the call and returns the TKP-7600 to the Intercom Menu.
1 Making Calls: Audio Calls Remember that the Intercom feature must be enabled from with in the Settings Menu. The following steps take place from the Intercom Menu, to access this menu refer to page 8: 1. Select an available client from the Intercom Menu. After selecting a client, the three (3) call options are displayed. This is almost always displayed after selecting an available client. 2 2. Select Audio Call.
Volume Slider Once the call is accepted, the TKP-7600 provides two-way communication between clients via audio only. Use the Volume Slider at the right of the call icon area to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it down to the bottom to mute the audio. To end an Audio Call, select the End Call button (see image at right). This immediately ends the call and returns the TKP-7600 to the Intercom Menu.
1 Making Calls: Baby Monitor Remember that the Intercom feature must be enabled from with in the Settings Menu. The following steps take place from the Intercom Menu, to access this menu refer to page 8: 1. Select an available client from the Intercom Menu. After selecting a client, the three (3) call options are displayed. This is almost always displayed after selecting an available client. 2. Select Baby Monitor Call.
Volume Slider When using a Baby Monitor Call, the receiving client is not notified. It provides one-way communication from the receiving client to the calling client. Use the Volume Slider at the right of the video feedback to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it down to the bottom to mute the audio. To end an Audio & Video call, select the End Call button (see image at right). This immediately ends the call and returns the TKP-7600 to the Intercom Menu.
1 Making Calls: Audio Broadcast Remember that the Intercom feature must be enabled from with in the Settings Menu. The following steps take place from the Intercom Menu, to access this menu refer to page 8: 1. Select Broadcast Call. A list populates of all available Intercom-Enabled devices. 2. Check the boxes of the clients to include in the Audio Broadcast. 3. Select the Confirmation button.
Volume Slider Once the call is established, all selected devices communicate via audio. Use the Volume Slider at the right of the call icon area to raise or slower the volume. Slide the indicator to the top for maximum volume or slide it down to the bottom to mute the audio. To end an Audio Call, select the End Call button (see image at right). This immediately ends the call and returns the TKP-7600 to the Intercom Menu.
Do Not Disturb Mode: Enabling the Do Not Disturb feature sets the current TKP-7600 unavailable. This means that the keypad cannot receive any calls from other interfaces. To enable this feature, use the slider located at the right of the text Do Not Disturb. These are the possible states: Do Not Disturb: ON Do Not Disturb: OFF This button functions as a toggle. Select it once to enable and tap the slider again to disable Do Not Disturb Mode.
Scenes Menu: The Scenes Menu is dictated by the system programmer. Access this menu by swiping to the right from the Main Menu. The Scenes Menu can contain up to a hundred (100) Scenes (buttons) per room. Keep in mind that the Scene Menu is unique to each room. Tap any button on the Scenes Menu to select a particular activity. Additionally the Scenes Menu can be set as the landing page when the Main button is selected.
Settings Menu: Access the Settings Menu by sliding the Title Bar and selecting the Settings button, refer to page 8 for more details. Most settings do NOT require interaction with the end-user. Changing some settings could cause issues with the Total Control 2.0 system, only do so when instructed by URC Technical Support. These are the available options: ● Sleep Settings: Manage when the LCD screen turns OFF. ● General: Contains all the general settings for the TKP-7600.
Sleep Settings: Below are the selectable choices available in this menu: 1. LCD Screen is Always On: When selected, the TKP-7600’s display never turns off. 2. LCD Screen will Turn Off: When selected the Turn Off After section is selectable. Choose from a 20 second, 30 second, or one (1) minute time out. 3. LCD Screen will Display a Night Mode: When selected the Start After and Duration option become active. ● Start After: The TKP-7600 times out based on the value entered here and goes into Night Mode.
General: Using the left and right arrow keys, enter the values of each category: 1. Date: The following can have its value changed: ● Month ● Day ● Year 3 1 2. Time: The following can have its value changed: ● ● ● ● ● Hour Minutes Seconds AM/PM 12 Hour/24 Hour 2 3. Automatically Adjust Clock for Daylight Savings: Check this box to have the TKP-7600 automatically adjust for daylight savings. 4. Temperature Scale: Set this either to Fahrenheit or Celsius.
Sound: Press the minus (-) button to lower the TKP-7600’s audio output or press the plus (+) button to increase the volume. Brightness: Press the minus (-) button to lower the TKP-7600’s display brightness or press the plus (+) button to increase the brightness. Additionally, dragging the slider to the right increase the audio output while dragging it to the left decreases it. Additionally, dragging the slider to the right increase the display brightness while dragging it to the left decreases it.
Proximity Sensor: Press the minus (-) button to lower the sensitivity on the TKP-7600’s Proximity Sensor or press the plus (+) button to increase the sensitivity. Additionally, dragging the slider to the right increases the sensitivity while dragging it to the left decreases it. The maximum distance of the proximity sensor is about three (3) feet. ● Enable Proximity Sensor: By default this check box is enabled. Uncheck the box to disable the proximity sensor.
System Information: Although none of the information can be modified. These System Pages display important information about the TKP-7600. These pages are only needed by a custom install professional or by URC Technical Support.
Network: This option displays important information about the current network. Caution, these settings should ONLY be changed by a professional. Entering values without specific instruction could easily result in the TKP-7600 failing to function correctly. 1 Here is the information that can be displayed here: 1. Connection: Displays the status of the network connection, connected or not connected. 2 2.
Intercom: The Audio-Video Intercom Settings menu is the location where the Intercom features must be enabled. By default this feature is disabled, it must be enabled in order for the TKP-7600 to communicate with other IntercomEnabled devices. ● Enable Intercom: Enables the audio intercom function. Once enabled, the Intercom icon is displayed when dragging down the Title Bar as see on page 8. ● Set Intercom Name: The label entered here appears on the Intercom menu of Intercom-Enabled devices in the system.
Factory Default: This should only be attempted by a custom install professional that is familiar with Total Control 2.0 or under instruction from URC Technical Support. Selecting this option resets the TKP-7600 to its factory state and does not function until the device is reprogrammed by a custom install professional. 1. Press and hold the Factory Reset button for over five (5) seconds. 2. Select Yes.
Specifications: Limited Warranty Statement These are the technical specifications for the TKP-7600: 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America.
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND.
remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2. URC’s Limitations of Liability IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Warning! Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
