User manual

2. Erase Macro Functions In The Ten Device Buttons
1.
Go to the SETUP mode by pressing the MAIN and
ENTER buttons simultaneously for
three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the MACRO button.
4. Press the KEY button.
5. Press one of the ten DEVICE buttons from which you
wish to erase the macro function and then press the SURE?
button at the next LCD screen.
6. Exit from Macro mode by pressing the MAIN button and
then exit from SETUP mode by pressing the MAIN button
once again.
D. Erasing Punch Through Functions
1.
Go to the SETUP mode by pressing the MAIN and
ENTER buttons simultaneously for
three seconds.
2. Press the PUNCH button next to the LCD screen.
37
8. Erasing Existing Programming