Owner’s Manual CAM-MC Indoor Network Camera
CAM-MC Indoor Network Camera Owners Manual ©2014 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. Universal Remote Control, INC. shall not be liable for operational, technical or editorial errors/omissions made in this manual. The information in this manual may be subject to change without prior notice.
TABLE OF CONTENTS Introduction 1 Features and Benefits 1 Parts Guide 1 CAM-MC Description 2 Basic Installation 3 Communicating with the Camera 4 Navigating the Web Interface - Live View 5 Navigating the Web Interface - Admin 6 Specifications 7 Limited Warranty Statement 8 End User Agreement 11 Federal Communication Commission Interference Statement 12 Regulatory Information to the user 13 Declaration of Conformity 14
INDOOR NETWORK CAMERA Introduction Congratulations on your purchase of the CAM-MC Indoor IP Camera! The CAM-MC is an indoor IP camera that allows for seamless viewing over the network with Total Control interfaces such as the TRC-1280, TKP-2000, TKP-7000, iPad/iPhone (with TC Mobile App installed) as well as any future Total Control graphical interfaces. Once networked, it sends its image to compatible Total Control graphical interfaces or any PC (running Internet Explorer) on the same local area network.
INDOOR NETWORK CAMERA CAM-MC Description Front View LAN LED Power LED Lens Lens Guide Rear View Name Description Power LED Blue – Powered ON LAN LED Green – Link (when connected to a network) Lens Lens for built-in camera Lens Guide Used to adjust lens for better focus Reset Bracket Connectors LAN Connection Page 2
INDOOR NETWORK CAMERA Name Description Reset Pressing the “F.D” button will return the unit back to factory default settings, including the Admin ID and password. Screw hole to mount the camera to bracket Bracket Connector LAN Connector Plug an Ethernet cable from the camera’s LAN connection to a PoE router or switch like URC's MFSPOE-8. (If a PoE switch is not used, you must use a PoE injector to supply power to the camera.
INDOOR NETWORK CAMERA Communicating with the Camera An IP address is required to view the camera and modify surveillance options. Once installed, locate the IP address assigned by your router (which will differ from the default address below). Your router contains a DHCP table which displays each connected device and its IP address. IP addresses normally resemble 10.20.30.40 or 192.168.1.xx. For further information, refer to the router’s documentation.
INDOOR NETWORK CAMERA Navigating the Web Interface - Live View Select from the options below to modify the Live View. Control Bar Channel Control Displays multiple camera streams. It modifies the primary and secondary streams (frame rate, image size, encoding, camera name, rate control mode, image quality and group of pictures structure) from the Admin page (Device Configuration> Camera & Motion). Show Full/Normal Screen View live video in either full or normal screen.
INDOOR NETWORK CAMERA Navigating the Web Interface - Admin Use the Admin interface to modify advanced features for the camera. To gain acccess to the Admin site, enter the default username and password (root and root). Quick Configuration: A guided step-by-step walkthrough to setup your camera’s configuration settings. Setup your Server Name Setup, Date & Time, Network Configuration and IP-CCTV DNS Setup.
INDOOR NETWORK CAMERA Specifications Camera Type Image Sensor Indoor / Outdoor Use Lens Min. illumination Video Compression IP Camera 1/4" VGA progressive scan CMOS Indoor Only 3.8mm F2.0, fixed lens 5 lux color H.264/MJPEG 640X480 (VGA) 320X240 (Q VGA) 160X112 (QQ VGA) Video Resolution Image quality Control 6 step quality control Max Streaming Speed Motion Detection Max 30 fps @ VGA resolution n/a VBR/CBR (H.
INDOOR NETWORK CAMERA Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for two (2) years from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
INDOOR NETWORK CAMERA SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS.
INDOOR NETWORK CAMERA This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the URC equipment.
INDOOR NETWORK CAMERA APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER.
INDOOR NETWORK CAMERA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
INDOOR NETWORK CAMERA Regulatory Information to the user n CE conformity Notice Products with “CE” marking comply EMC Directive 2004/108/EC, issued by the commission of the European Community. 1) EMC Directive lEmission lImmunity lPower : EN55022:2006+A1:2007 : EN61000-3-2:2006+A2:2009 : EN61000-3-3:1995+A1:2001+A2:2005 n Declaration of Conformity “Hereby, Universal Remote Control Inc.
INDOOR NETWORK CAMERA EU Declaration of Conformity Manufacturer : Address : OH SUNG Electronics Co., Ltd.
NOTE Page 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
