MXW-920 Waterproof Controller Owner's Manual
MXW-920 Owner’s Manual ©2012-2013 URC, Inc. The information in this owner’s manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this owner’s manual may be subject to change without prior notice.
TABLE OF CONTENTS Congratulations! 1 Using the MXW-920 2 Displaying the Settings Screen 3 Selecting from the Setup Screen 3 Setting the LCD 4 Light Settings 6 Sound Volume 6 System Settings 7 Version Information Displays 7 Selecting from the Edit Screen 8 Adjusting the Text 8 Learn commands 9 Erasing learned data 9 Performing a Factory Default 9 Battery Installation 10 Specifications 10 Limited Warranty Statement 11 End User Agreement 13 Federal Communication Commission
MXW-920 OWNER’S MANUAL Congratulations! Thank you for purchasing the Complete Control MXW-920 Waterproof wand-style controller. This unit can directly control every IR device in your home. You can also control devices located in different rooms by integrating an MRF base station. Controlling your home is simple with the MXW-920 remote. Waterproof IR/RF wand-style controller The Waterproof MXW-920 wand-style controller can be used outside as well as indoors.
MXW-920 OWNER’S MANUAL Using the MXW-920 The MXW-920 displays the Main or Device page at the top of the screen. Below the title, the LCD displays the device or command names. All the hard buttons of the MXW-920 are changed to control the functions of the selected device. The Title displays the Main or device pages you can control. The LCD button labels describes the functions available for the current activity or device. Press either of the Page buttons to see any other available choices.
MXW-920 OWNER’S MANUAL Displaying the Setup Screen You can adjust the settings of the MXW-920 controller whenever you like. Simply press and hold both the Main and the Enter buttons at the same time for three seconds. The screen displays the Setup and the Edit screens. Press the Page + and - buttons to toggle between both screens. If you do not press any button on the Setup screen within 30 seconds, the MXW-920 times out and automatically returns to normal operation.
MXW-920 OWNER’S MANUAL Setting the LCD With these settings, you can set the MXW-920 to constantly display the LCD or have it turn off when not in use. Additionally, you can control the contrast of the screen and the color of the backlighting. To activate the LCD On/Off setting, press this button. See below. To activate the Contrast setting, press this button. See the next page. To activate the Brightness setting, press this button. See the next page.
MXW-920 OWNER’S MANUAL Setting LCD Contrast You can adjust the contrast of the LCD screen using the Left and Right arrow keys once the LCD Contrast screen has been selected (shown on the previous page). The current contrast is displayed here via a bar graph. To save any changes you have made, press Save. To exit without saving any changes you have made, press Exit. Adjust the Contrast setting with the Left and Right keys as shown in the previous pages.
MXW-920 OWNER’S MANUAL Light Settings You can adjust the backlighting of the remote in two additional ways: 1. You can turn on/off the LCD and the hard button backlighting. 2. You can select the length of time the lighting stays on after the last button press from a range of values between 10 seconds and 90 seconds. Change whether the backlighting is on or off by pressing this button. If you want the backlighting always off, set it to OFF. If you would like the backlighting on, select ON.
MXW-920 OWNER’S MANUAL System Settings You can set your MXW-920 to display the Low Battery warning at a power level between 0% and 20% (in 5% increments). The Power bar indicates available power in black. Press here to adjust the battery warning level. The Memory bar indicates available memory in black. The memory in use is white. To exit, press Main. Version Information Displays Should you be curious, the Version indicates what firmware and software versions were used to program your MXW-920.
MXW-920 OWNER’S MANUAL Selecting from the Edit Screen This section is for CUSTOM INSTALLER USE ONLY. Touch the button for the setting you’d like to adjust: Text - Change the label of a device or button. Learn - Transfer IR data from remote to MXW-920. Erase - Remove learned data. Factory - Installer ONLY. Do not press unless instructed by a custom installer. All data will be lost once the sequence has begun. Adjusting the Text Select Text from the Edit screen to modify any labels.
MXW-920 OWNER’S MANUAL Learn commands Transfer commands from a component remote to the MXW-920 using the Learn feature. Device - Copy a command to a device button. Button - Copy a command to a button within a device. To exit, press Main. Erasing learned data Remove any unwanted learned commands from the remote. Button - Erases a specific command residing on a button within a device. DevBtn - Removes any learned commands on a device button label such as Cable.
MXW-920 OWNER’S MANUAL Battery Installation Open the battery cover by using a Phillips screwdriver to remove each of the four screws. Remove the cover. Observe the + and - polarity indications inside the battery compartment. Place the four AAA batteries into their positions in the battery compartment observing the + and polarity indicators on the batteries. Now, replace the battery cover by replacing the 4 screws into their slots.
MXW-920 OWNER’S MANUAL Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
MXW-920 OWNER’S MANUAL NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
MXW-920 OWNER’S MANUAL With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
MXW-920 OWNER’S MANUAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE Page 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.