User's Manual

3
1.Before Setup CF Card on your PC
In order to setup WCFM100 driver into PDA, you must have Microsoft
ActiveSync software available on your computer and make sure the
computer is synchronised with PDA then transfer WCFM100_v5.0.10.0
_27.p3.exe (which also can be download from SparkLAN support
website) program from your computer to PDA. The driver can be
transferred via Active Sync into your PDA or save into storage device
such as CF (Compact Flash) or SD (Secure Digital) card that can be
used in PDA device. Run the Driver.cab file from PDA Explorer to begin
the setup process.
Release Note:
1.This driver currently available on Pocket PC (PDA) 2003 with
WinCE4.2, Pocket PC 2005 with WinCE 5.0, and Linux 2.4 MontaVista
2.CPU support for X-Scale and Intel Boulverde PXA 275 processor.
2. Setup Procedure
Below is the setup procedure,
2.1 Prepare one computer with MS-Active sync software installed
2.2 Use USB or RS-232 cable to connect your computer and PDA
2.3 Run the MS-Active sync to synchronize both devices
2.4 Make sure your computer and PDA is already connected.
( please check the Active sync status. )
2.5Transfer the Driver.cab file to your PDA.
2.6 Run WCFM100_v5.0.10.0_27.p3 driver from your PDA. (Please
download the driver and copy it to you PDA with either Active Sync or
other storage devices such as CF/SD cards).
2.7 Follow the dialog box step by step to complete this installation.
If there are one or more steps you are missed, please try it again.