User's Manual

If none of these work, you can try a wired connection between your
computer and your router by connecting an Ethernet cable between
your computer’s LAN port and a LAN port on the router. (Ensure
that the corresponding LAN port LEDs are lighted.) If a wired
connection works, the problem is almost certainly with your
computer’s wireless connection to the router. You should then try
the previous steps again.
If you have a connection between your computer and your Wireless
MAXg Router, it
’
s likely the router is not connected to the Internet
or is not functioning correctly.
Step 2: Is your Wireless MAXg Router
responding?
If you have a wireless or wired connection to your Wireless MAXg
Router, open your Web browser to the router’s address:
http://192.168.2.1 (Please note that if you’ve modified the
router’s LAN IP address, you should use the new one.)
If the Wireless MAXg Router
’
s Web interface doesn
’
t appear, your
computer may need to re-establish a connection to your router:
1. Release and renew your computer
’
s network connection.
Windows XP, 2000, and NT users:
Press Start and select Run.
Type cmd and press ENTER.
Type ipconfig /renew and press ENTER.
Type exit and press ENTER.
Windows Me, 98, and 95 users:
Press Start and select Run.
Enter winipcfg and press ENTER.
Press Release.
Press Renew.
Close the application.
Your computer should acquire an IP address (such as
192.168.2.5) from the router.
2. Try to access the router
’
s Web address at
第 4 頁，共 8 頁Wireless MAXg Router User Guide
2004/12/20file://D:\Data\USR\Certificate%20document\G-Force%20PC-PCI%20User%20Guide%2012...