User's Manual

http://192.168.2.1
If the Wireless MAXg Router’s Web interface doesn’t appear, the
router may need to be restarted:
1. With a thin tool, such as a paper clip, briefly press the RESET
button on the back of the router.
Note: If you press the RESET button for more than five
seconds, the router will return to its factory default settings.
2. Wait about 30 seconds.
3. Release and renew your computer’s network connection. (See
above for details.)
4. Try to access the router’s Web address at
http://192.168.2.1
If you still cannot access the Wireless MAXg Router, the router may
need to be restored to the default factory settings. (Please note that
you will lose all of your router’s custom settings and will need to
set it up again as if you were installing it for the first time.
Alternatively, if you’ve made a backup of the settings, you will be
able to restore them.)
1. With a thin tool, such as a paper clip, press the RESET button
on the back of the router for at least five seconds.
2. Wait about 30 seconds.
3. Try to access the router’s Web address at
http://192.168.2.1
If the Wireless MAXg Router’s Web interface still doesn’t appear,
it’s
possible that the router has failed. Please contact U.S. Robotics
Customer Support.
If the Wireless MAXg Router’s Web interface appears, the problem
may be with its connection to your cable/DSL modem.
Step 3: Can your Wireless MAXg Router
第 5 頁，共 8 頁Wireless MAXg Router User Guide
2004/12/20file://D:\Data\USR\Certificate%20document\G-Force%20PC-PCI%20User%20Guide%2012...