User's Manual

Wireless MAXg PC
Card and PCI Adapter User Guide
Home Installation Configuration Tutorials Help
Troubleshooting Ping Procedure
If at any time during the ping procedure you do not receive a return
message for a successful ping, this means that the address you are
pinging has been changed and is causing a conflict or is no longer
available. Check the address in the Web User Interface and make
any necessary corrections using the console mode. After you have
made the corrections, continue with the ping procedure.
Note: Linux users can perform steps 3 through 7 after opening a
terminal.
1. Click Windows Start and then click Run.
2. In the Run dialog box:
Windows XP, 2000, and NT users: Type cmd and click OK.
Windows Me, 98, and 95 users: Type command and click
OK.
3. Type Ping 127.0.0.1. This is your local host address and this
will ensure that the TCP/IP protocol is installed and functioning
properly. If you cannot complete this ping, disconnect the
Wireless MAXg Router and then repeat the installation
procedure.
4. Type Ping followed by your IP address. This will ensure that
your computer is responding to requests. If you cannot
complete this ping, make sure all the cables are properly
connected and that all the correct drivers are installed.
5. Type Ping followed by your gateway address to check the
communication with your gateway. The default gateway address
is 192.168.2.1 This will ensure that you can connect to other
第 1 頁，共 2 頁Wireless MAXg Router User Guide
2004/12/20file://D:\Data\USR\Certificate%20document\G-Force%20PC-PCI%20User%20Guide%2012...