User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
3.5. DEAD TRANSMITTER
How can I recognize a dead transmitter problem?
Externally: When you turn on your system:
• The system does not detect.
Laptop:
• Voltage near to 0Vpp
How can I solve a dead transmitter problem?
If the Transceiver Board is not working, change it by a new one.
Please check the connection cable between the Power Supply and the Transceiver Board.
If the synchro pulse from the POWER supply is not OK, the system will stop the transmission.
If the problem persists, it can be caused by a blown fuse in the Power supply. Change the power supply by a
new one.
Check the power line frequency to be 50Hz+/- 1Hz or 60Hz +/- 1Hz.
How can I know the dead transmitter problem has been solved?
The system is working normally.
You are done!
13