User's Manual

3.6. DEAD RECEIVER
How can I recognize a dead receiver problem?
 Externally: When you turn on your system:
• The system does not detect. (Remember that there are 6 independent receivers one for every loop).
• You can try if a dual system to change the receiver cable to red connector or grey connector
 Laptop:
• The signal is near 6 dB or less in all receiver buffers.
How can I solve a dead receiver problem?
 The problem may come from the Transceiver-Receiver connection cable. It may be broken during the
installation.
 The problem may come from the Receiver Board. It might be damaged. Try another Receiver Board
 The problem may come from the Transceiver Board. It may have one Receiver channel damaged. Try
another Transceiver Board or test with the other Receiver channel.
How can I know the dead receiver problem has been solved?
 The system is working normally.
You are done!
14