User's Manual

4. CONFIGURATION
4.1. CONNECTION METHOD
USS 58 kHz systems have been designed to fit into every installation needs. They can be configured in multiple
ways.
Connection between Transceivers or between Transceivers and Receivers is done through 10 ways telephonic
cable which allows easy adaptation to the installation place needs.
4.1.1. ANTENNA CABLES AND CONNECTION
Each Transceiver antenna can be connected to 2 independent Receiver antennas by a 10 ways flat cable with
NOT polarized connectors. Please follow the instructions carefully in order to manufacture the cable correctly.
MATERIAL
1 x CAB-FL-10-I 2 x CON-10-TEL-NOPOL 1 x ACC-CONTOOL-10
PROCESS
 1. Cut the cable at the necessary length.
 2. Use the Crimp tool to strip the ends of the
cable.
 3. Do a cross connection: cables must have the
same colour in the same side (means white on
left in one edge, in the other edge, left must be
also white).
Place the cable correctly (same colour order).
 4. Insert one connector.
NOT POLARIZED for Receiver Boards
 5. Insert second connector in the same
orientation as the first one.
 6. Crimp the cable
 Connect the cable between Antennas following Section 4.2. CONFIGURATION EXAMPLES
 Test the cable with a system to check that it is working correctly.
You are done!
16