User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
4.2. CONFIGURATION EXAMPLES
4.2.1. TRANSCEIVER BOARDS
The connectors from Transceiver Boards which connect to other antennas are red connector (K in the drawing)
and grey connector (L in the drawing). Apart from the RX signal, they also take communication between
Transceiver and the 2 local Receiver Boards and communication with further Transceiver Boards in the net, if
any.
4.2.2. RECEIVER BOARDS
The connectors in the Receiver Board are red connector (F in the drawing) and grey connector (G in the
drawing).
18