User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
5.2.3. GSM MODEM
Parts needed: GSM MODEM.
Input the SIM CARD into the GSM MODEM.
• To enter or change PIN number, access the system using Serial Port connection (See Section 5.2.1.
RS232 PORT)
• Select Command Transmission (See Section 5.4.5. COMMANDS TRANSMISSION) and input !PNxxxx
(xxxx=PIN number)
• Save parameters (See Section 5.4.4. PARAMETERS)
• Disconnect (See Section 5.4.3. DISCONNECT)
Connect the communication cable from the GSM MODEM to the system
At power on, the system will detect that it has a PIN number and will activate the GSM MODEM. Then it
will be on hold waiting for the communication to come through.
Follow the same process than Section 5.2.2. ANALOG MODEM
24