User's Manual

5.4.2. CONNECT /CONNECTED
 Connect to the system(s)
 When connection is active, then it is shown as 'Connected'
 Software will search for all the systems
connected and load them into the System
window
5.4.3. DISCONNECT
 Disconnect from the accessed system
5.4.4. PARAMETERS
 Reset all parameters in the system to factory values
 Save all parameters into system memory
 Refresh all parameters in the software from the system memory
 Load From File: Load parameters from a file into the system
 Save into File: Save system parameters into a file
5.4.5. COMMANDS TRANSMISSION
 Opens a command window in order to send any command directly to
the system
31