User's Manual

5.6.3. POWER TIMES
 The following information can be found:
• Total number of Power ON
• Total Number of Power ON hours
(working hours).
5.6.4. LEDS
 This selector is used to choose what information to be displayed on the LED bar (See Section 2.
HARDWARE)
• RX: Receiver noise/signal
• V1: Voltage of Transceiver Upper Loop
• V2: Voltage of Transceiver Lower Loop
• T1: Temperature in board system
5.6.5. CLOCK
 Set Date and Time and click 'Update' button to adjust the system clock
SUMMER / WINTER TIME (DAYLIGHT SAVING TIME)
 This option is only available for firmware versions higher than V4.AE
 Select 'S/W Time' and press button to configure daylight saving time for your
region.
For Europe or USA, system automatically determines
whether Daylight Saving Time is in effect for a
specified time zone and updates the corresponding
local time
For other countries, specify month, day and hour to
update the time and click 'Send' button to save
daylight saving time.
44