User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
5.6.7. CONFIGURATION OPTIONS
Detection:
• This should be left as from factory settings.
Others:
• Alive Signal: Activates or deactivates “alive light”,
which shows that the system is running correctly
and it is not “hung”
• Master & NET (ONLY INFO)
• Ignore switches (option available for systems with
versions lower than V3.B4 and V4.B4). With this
function selected, the system will ignore any change
or parameter introduced from the switches. This is
to prevent unauthorized access even from the
hardware / switches
• Alarms RS232 (option only available for systems
with versions V4.BD or higher). Enable Beeper
alarms in order to receive alarm events via Rs232
46