User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
5.7. TRANSMITTER TAB
5.7.1. START / STOP TX
From here the Transmission can be stopped, this can be used to confirm
if an alarm is coming from tags / labels.
If the Transmission is stopped and the alarm stops, then the alarm was
caused by a tag.
5.7.2. TX LOOPS
Turn ON/OFF any of the 2 independent Transceiver loops in the
Transceiver antenna. (Default ON).
TX Loops states can be saved.
5.7.4. DISCOVERY TOOL
47