User's Manual

 Main tool to synchronize the system.
 In 99% of cases this adjustment is not necessary. Anyway, it is always good to take a look at the
environmental electric noise throughout the ' Discovery Mode' feature.
 When Discovery Tool is ON, the transmitter is then turned off, and the system ONLY receives.
 Standard Synchro delay value is 0.2ms
 For Slave systems, 'Follow Master' enabled will set the same delay than the Master.
 This option is available for systems with version 3.A0 and 4.A0 or higher.
 Once the Discovery Tool is ON, transmission loops on the selected system are stopped and electrical noise
and other possible systems out of phase are shown on the screen. In the scope is represented the amount
of noise in 58 kHz through the 0º to the 360º phase in the mains. (From 0 ms to 20 ms in one 50 Hz period).
48