User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
FIELD SITUATIONS
1. Systems perfectly in phase (99% of times), NO NEED TO SYNCHRONIZE
• Transmission loops are displayed in the negative area. The presence of another system which is
correctly synchronized with yours, can be seen right over system transmission blocks (For versions 4.C0
or higher)
2. Systems out of synchro, NEED TO SYNCHRONIZE, Only one external reference
• When another 58 kHz transmitter is transmitting out of synchro, it can be easily seen from the scope
screen. The positive area is reserved for these situations. In the following picture, the presence of
another 58 kHz transmitter can be easily seen on that area. Only one external reference means that
only 3 TX blocks from other system can be seen in the upper side of the screen.
51