User's Manual

• Change the delay manually to synchronize with the system out of synchro and match the system
transmission blocks with the other systems around
• As it can be seen on the picture above, our TX blocks (green blocks) are being moved until the position
matches with the other system TX blocks. The synchro can be followed and verified visually.
• After a good synchronization process, press “OFF” button
 3. Systems out of synchro, NEED TO SYNCHRONIZE, More than one external reference
• When there is more than one reference to synchro, then a correct synchronization is not possible. This
means that previous to the installation, there were already at least 2 systems out of synchro, probably
these systems are already not working. In order to fix the problem it is necessary to previously
synchronize between them the existing systems.
• 3 blocks of abnormal duration, means at least 2 previously not synchronized systems
52