User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
• After synchronizing ALL external systems, the situation will be as follows:
• Then the system can be correctly synchronized using this unique and only external reference.
• Please follow step 2, to synchronize de system in accordance.
5.7.5. TRANSCEIVER STATUS
Transceiver Voltage
• Shows the Voltage in the TX loops. It should be
always in the range of 1200 to 1400V (GREEN)
• If it is lower, it might be because a defective
transmitter or bad resonance. Then it might be
necessary to retune the Transceiver resonance
(Hardware).
Transceiver Temperature
• Shows the current Temperature in the
Transmitter Board.
• Should be always in the green area (10° to 55°).
53