User's Manual

5.8.3. START/STOP RECEIVER LOOPS
 From here, each Receiver loop can be independently turned on and off. If there is a high disturbance in any
of them, it can be disabled. Receiver Loops states be saved.
5.8.4. ANTI NOISE ALGORITHMS
 Anti Noise algorithms are used to minimize the electrical noise. Depending on the level of electrical noise,
it is recommended to select different positions in the noise selector. Each antenna is independent.
 There are 2 active modes in noise fighting.
 Position 0 turns off noise fighting algorithms in mono-antenna.
 Back Ground suppression is also OFF by default.
55