User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
5.9.3. PEOPLE COUNTER INSTALLATION
There are two important points to take account at the installation time:
• 1. Position of the IR-RX and IR-TX Modules inside the antenna:
Set the position of all the IR-RX modules (People Counter A) and IR-TX modules (People Counter B) so
that all white connectors are looking at the same point.
• 2. Connection of the receiver antennas:
Version V4.B4 and higher
People Counter 1 (white connector) should be looking at Red Channel Receiver antenna
People Counter 2 (no white connector) should be looking at Grey Channel Receiver antenna
Version lower than V4.B4
People Counter 1 (white connector) should be looking at Grey Channel Receiver antenna
People Counter 2 (no white connector) should be looking at Red Channel Receiver antenna
59