User's Manual
Table Of Contents
- 1. G10V SYSTEM OVERVIEW
- 2. HARDWARE
- 3. QUICK TUNING
- 4. CONFIGURATION
- 5. SOFTWARE
- 6. SAFETY AND DECLARATIONS
THE FOLLOWING POINTS SHOULD BE CONSIDERED BEFORE USING DISCOVERT TOOL:
Discovery can be made with transceiver or receiver antennas (Red and Grey Channels).
Recommended order is:
• 1. Red Channel (In case you have receiver antenna on this channel):
1.1 Disable Transceiver receiver loops
1.2 Enable Red Channel receiver loops
1.3 Disable Grey Channel receiver loops
• 2. Grey Channel (In case you have receiver antenna on this channel)
2.1 Disable Transceiver receiver loops
2.2 Disable Red Channel receiver loops
2.3 Enable Grey Channel receiver loops
• 3. Transceiver
3.1 Enable Transceiver receiver loops
Furthermore, Discovery should be done with the Master system as long as you have more than one
transceiver antenna in a net (slave systems). For these cases, DISABLE “Follow Master” option on every
Slave system. Otherwise you could see transmission loops from slave systems which may confuse the
scope.
48