User's Manual

9
MONO82_USR_MAN_REV_A
This document was created to provide intended recipient documentation of requested device for technician purposes only. Any other usage of this document is an illegal and unlawful act. This document is a confidential and proprietary
document of Universal Surveillance Systems and consist of i nformation what can be protected by copyri ghts or the others intellectual property protection instruments of the others subjects. All other informa tion, what are not generally
known ones, is an intellectual property of Universal Surveillance Systems. This document including any and all attachments hereto is intended solely to be used by individual or entity to which it is addressed. If the reader of this
document is not the intended recipient, or an employee or agent responsible for delivering this document to its intended recipient, you are herewith notified that any dissemination, distribution, copying or retention of this document
or the informa tion contained her ein is strictly prohibited. If you have received this document in error, please notify us at service@un ivser aleas.c om i mmediately and permanentl y delete or/and destroy the original and any copy or
printout thereof.
- Jitter - Generates random values (the order of microsecond)
and adds them to the phase delay. The setting helps eliminate
mains interference.
- Period - Sets the value of the manual settings of system
transmitting period. Parameter is changeable only when it is
"Individual synchro" active.
6.4.2 TX
TX - TX power - Select the value using scrollbar and confirm it with button.
The transmit power can be minimum at level 2 and
maximum at level 7.
- Use sweep - Leave this function always enabled. System transmits in eight
frequencies in that case. This is important due to untuned labels in 8,2MHz
frequency. You can set the range of minimum and maximum frequencies, but it is
recommended to leave default values.
Due to restriction on certain frequency bands by the FCC, 8.2MHz MONO system
does not transmit in the following bands:
Low frequency of forbidden band 1: 8.271 MHz
High frequency of forbidden band 1: 8.314 MHz
Low frequency of forbidden band 2: 8.342 MHz
High frequency of forbidden band 2: 8.435 MHz
- Label protective mode - Save label from high transmiting power near the antenna,
which can destroy the label. Function temporarily reduces the transmitting power.
6.4.3 RX
RX - Gain - With scrollbar select the desire gain and confirms it with button. Higher gain
can increase received signal but also noise from environment. Recommended value
is 100.
Alarm counters - Display counted alarms.
Quick adaptation - System make continual quick adaptations after the set time. This
button allow you to make adaptation instantly.