Installation Guide
Walk-in Wall Surround Installation
INSTALLATION
1 Oakwood Blvd STE200 Hollywood, FL 33020 • 305-330-1146
Contents of the SURROUND SYSTEM*
• TWO (2) 60” by 60” SURROUND SHEETS with a
bullnose bend along all four sides.
• TWO (2) 8” by 60” each CORNER CADDIES to
cover where the Wall Surround Sheets meet.
Each caddy features TWO (2) shelfed decks for
shampoo, soap and other bath product storage.
• FOUR (4) FLAT ADHESIVE ROLLS
• TEN (10) COLOR MATCHING SILICONE TUBES
• TWO (2) WHITE CAULK SEALANT TUBES
What you’ll need...
Aside from the included materials additional items will be neccessary to ensure proper installation of the
SURROUND system.
The following tools are recommended to have on hand before beginging installation:
• Work Table
• Level
• Tape Measure
• Straight Edge
• Tin Snips and/or Utility Knife
• Sharpie or Wax Pencil
• Extension Cords
• Safey Glasses
• Denatured Alcohol
The ideal finish will require precise clean cutting of the sheets and the trimming of the bullnose bends
found along the sheet’s edges. It is recommended to us a powered jigsaw tool with a Carbide Edge Blade.
*Walk-in tubs with widths 32” and larger will recieve three (3) instead of only two (2).
1-1/8”
1-1/8”
33-3/8”
11”
10”
4-3/8”
1-9/16”
3/8”
7.5”
5.5”
90
106
Two (2) Corner Caddies
Corner Caddy Shelf
Two (2) 60 by 60” Wall Sheets
60”
60”
60”
1”