Warranty

ManualsBrandsUniversal Tubs ManualsBathStar 6 ft. Whirlpool Tub in White

INSTALLATION & OPERATIONAL

MANUAL

Manufactured by SWCORP

5701 NW 35th Avenue

Miami, Florida 33142

DON’T WAIT! REGISTER NOW!

and is eligible for warranty coverage. Mail in the completed registry card to 5701 NW 35th Ave

Miami, FL 33142 or register online at www.SWCORP.com/register.

Product Registration Card

Name ..................................................................................... Address ....................................................................................................................

City ............................................... State ........................... Zip ..............................

Phone ........................................... Email ....................................................................

Date of Purchase........................... Order or Purchase # .................................................... SKU or Model # .........................................................

Installer’s Name ..................................................................... Phone ................................................................................

I have read the Owner’s Guide carefully and understand and agree that any installation, operation or maintenance of the bathtub must be done strictly

in accordance with instructions and guidelines contained in the owner’s manual and installation guide.

Signature.............................................................................. Date ..................................................................................

CUT ALONG

DOTTED LINE.

DIM-V3 THIS LATEST MANUAL VERSION

SUPERSEDES ALL PREVIOUS VERSIONS.

Summary of content (14 pages)

PAGE 1
INSTALLATION & OPERATIONAL MANUAL Manufactured by SWCORP 5701 NW 35th Avenue Miami, Florida 33142 DIM-V3 THIS LATEST MANUAL VERSION SUPERSEDES ALL PREVIOUS VERSIONS. DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your bathtub is recognized as an official purchase and is eligible for warranty coverage. Mail in the completed registry card to 5701 NW 35th Ave CUT ALONG Miami, FL 33142 or register online at www.SWCORP.com/register. DOTTED LINE. Product Registration Card Name....
PAGE 2
PAGE 3
INSTALLATION INSTRUCTIONS & OWNER’S MANUAL (Refer to individual model sheets for specifications) BEFORE BEGINNING INSTALLATION, CHECK THE FOLLOWING ITEMS AND READ THE INSTRUCTIONS CAREFULLY. CHECK ENTIRE UNIT FOR CONCEALED DAMAGE. If there is any damage, DO NOT INSTALL! Shipping damages must be reported to the carrier immediately.
PAGE 4
READ AND FOLLOW ALL INSTRUCTIONS 1. 6. A green colored terminal (or a wire connector marked `G’, `GR’, `GROUND’, or `GROUNDING’) is provided within the terminal compartment. To reduce the risk of electrical shock. connect this terminal or connector to the grounding terminal of your electrical service or supply panel with a continuous green insulated copper wire equivalent in size to the circuit conductors supplying the equipment. but no smaller than No.10 AWE (5.
PAGE 5
GENERAL NOTES WARNING: Failure to follow instructions exposes users to risk of electrical shock or fire. CONSTRUCTION The tub surface is made of marine grade acrylic. The substructure is a composite laminate constructed of fire retardant fillers. PLUMBING ROUGH-IN The bath waste pipe protrudes below the base approximately one inch. Provide supply pipe, rough-in waste and vent per local code. ELECTRICAL Factory wired for 110 Volt 20 Amps. Ground-Fault Circuit Interrupter (GFCI) is required.
PAGE 6
INSTALLATION INSTALLING ONE-PIECE SKIRT CONTINUED PLUMBING ROUGH-IN The bath waste opening protrudes below the base approximately one inch. You may be required to cut a hole in the subfloor to accommodate bath waste. In slab on grade or prestressed concrete floors where cutting is not desired, the tub may be raised up by building the platform higher and using extra mortar under the tub. If a joist must be notched, verify that structure will not be weakened. Remove only what is necessary.
PAGE 7
INSTALLATION ATLANTIS TOUCH PLUS 1. START UP AND OPERATIONAL INSTRUCTIONS 2. 3. 4. 5. Purge Cycle: There are two different purges: The first at 30 minutes after the tub is used and the second every 24 hours at the time determined by when power is turned on at the breaker box.
PAGE 8
INSTALLATION CONTINUED TYPICAL INSTALLATIONS Make absolutely certain that access panels and/or service openings are properly placed and that all possible areas where service may be required are accessible.
PAGE 9
INSTALLATION CONTINUED ACCESS SKIRT FOR ALCOVE INSTALLATION (IF INSTALLED) Custom fitted skirt ensembles are available to provide the perfect finish for your bath and bathroom. All five (5) foot and six (6) foot rectangular models can be fitted with a two piece removable front skirt. MAGNET 1 1 2 4 3 HYDRO CONTROL (PUMP) 4 Used to turn the water jets ON and OFF. Used to increase or decrease air pressure flowing through the water jets.
PAGE 10
INSTALLATION Safety Suction CONTINUED Star Jet Inlet that allows water to return to pump (standard on all models). If suction is blocked, the pump will automatically shutdown. Allows user to adjust the direction pressure, by timing clock wise open flow, counter clockwise close flow. Close H.E.E.T. (if equipped) Maintains water temperature without a heater using kinetic energy of the water pump.
PAGE 11
CAUTION USER SHOULD periodically flush operating system (not to exceed 90 days). As a minimum, shall consist of filling and running system and draining. SWCORP recommends flushing with a mild solution of water and sanitizer such as chlorine or other commercially available whirlpool bath flushing products. DO NOT use abrasives. They may dull or scratch surface of the acrylic. DO NOT use oil based solvents. Clean with only a damp cloth or mild detergent or any common glass cleaner.
PAGE 12
LIMITED WARRANTY COVERAGE READ CAREFULLY, THE WARRANTY APPLIES ONLY TO ORIGINAL OWNER 10 YEARS STRUCTURAL BATH SHELL: SWCORP warrants its bath shells against loss of water through the fiberglass laminate of the tub body as a result of a defect in materials and workmanship, for a period of ten (10) years from the purchase date. RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user.
PAGE 13
NOTES 11
PAGE 14
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. INSTALLER: SAVE INSTALLATION INSTRUCTIONS WITH HOMEOWNER HOMEOWNER: KEEP INSTALLATION INSTRUCTIONS FOR FUTURE REFERENCE Please leave owner’s manual with warranty. If you have any problems or questions during installation, please call technical service at (305) 330-1146 Record the numbers here for handy reference: Model No. Serial No.