Specification
4678I
DROP-IN
It is vital that tub is completely level for drain to work properly.
Key Attributes
Shape: .................................................... RECTANGULAR
Material: ................................................ ACRYLIC
Soaker Weight: .................................... 150 lbs
Jetted Weight: ..................................... 180 lbs
Average Fill Capacity*: ..................... 120-130 gal
*Estimated with occupant inside. May vary based on occupant’s volume.
Required Electrical Service 110v
Air Bath or Whirlpool ......................... 1x 15 amp GFCI
Whirlpool w/ Inline Heater .............. 1x 20 amp GFCI
Whirlpool & Air Jetted ....................... 1x 20 amp GFCI
Soaker ..................................................... n/a
• IMPORTANT! TEST THE TUB’S DRAIN AND JETS (if any) BEFORE PERMANENT
INSTALLATION!
• INSPECT THE TUB WHEN RECEIVED! Report any damages or missing parts
within 5 business days of delivery date.
• Before ordering or installing, please consider future access to equipment.
• Please measure tub on-site before building tub surrounding!
• Jet, pump & blower locations are predetermined and cannot be changed.
• Tub door must remain closed when not in use.
v5 / 201905. All rights reserved. Subject to change without notice.
• Please note that installer(s) must be certied or warranty will be voided.
• Measurements are subject to a +/- .5” variance and subject to change without
notice. Measurements here in supersede all other published specs prior to
publication date shown below.
• Inline heater (if included) is designed to maintain water temperature during
operation. It will not heat cold water to desired bathing temperature.
• Product must be registered for warranty activation. See user manual or visit
SWCORP.com/register for more information.
Compliance: Uniform Plumb-
ing Code UPC®;; International
Plumbing Code IPC®; ADA
Standards: ASME A112.19.15;
CSA C22.2 No. 218.2-15; UL
1795, 5th Edition Issued Septem-
ber 02, 2016 including revisions
through August 25, 2017
Certifeid: UPC,EGS
33
66
56
60
27
16
Available Therapy Systems
4678I(S) ...............................Non-Jetted Soaking
4678IW ................................Whirlpool Jetted
4678IA ................................Air Jetted
4678ID .................................Whirlpool & Air Jetted
4678ID*X ............................Whirlpool & Air Jetted Deluxe
Key Measurements (inches)
Overall Outer: ...................78.312 L x 45.75 W x 23 H
Overall Interior: ...............66.75 L x 33.875 W x 19 H
Interior Base: ....................56.75 L x 24.25 W
Built-in Seat: .....................n/a
Soaking Depth: ................15
Drain to Side Wall: ..........39.375
Drain to Nearest Wall: ....14
Lip Size: ..............................4
Deck Space: .......................8.5
Tile Flange: ......................... n/a
Arm Rest: ............................n/a