Specification

Installation: Drop-in
cannot be under mounted
4872C
47
5
8
" x 71
1
2
" x 23"
4872C
4872C
4872C
• Before ordering or installing, please consider future access to
equipment.
• Add bedding compound to fully level and support bottom of tub.
• Tubs equipped with an air bath or a pre-leveled
foam base are designed to rest on the floor without bedding
compound, provided the floor is level.
• Please measure tub on-site before building tub decking.
• Jet, pump & blower locations are predetermined and cannot be
changed.
• Suction and control locations may vary.
• Specifications and configurations are subject to change without
notice.
• Measurements are +1/2" and are subject to change without
notice.
• Measurements herein supersede all others published prior to
publication date shown below.
 OPTIONS
 Colors Available - White Biscuit
 Quick Ship - reduces lead time - call for availability
 Inline Heater with Pump - Whirlpool or Whirlpool and Air
 Lift & Turn Drain Kit -Chrome,Brushed Nickel, White
 Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air
4872C
Air jets,
Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:
Required Electrical Service 110 Volt
Air Bath or Whirlpool 1-15 amp GFCI
Whirlpool with Inline Heater 1-20 amp GFCI
Whirlpool and Air 1-20 amp GFCI
Soaker
GENERAL SPECIFICATIONS:
Material Acrylic
Plumbed Weight : 140lbs / 64kg
Soaker Weight : 110lbs / 50kg
Average Fill: 70 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
66
1
4
_
42
13
1
2
_