MODEL T1-AZ065 INSTALL GUIDE ‘’Complies with ASME A112.19.2-2013 ‘’Conforme à ASME A112.19.2-2013’’ Certified by IAPMO R&T For more information visit us at www.ANZZI.
- Please read these instructions carefully before starting installation and retain for future reference. Please leave these instructions with the end user. - Remove all packaging and check the product for missing parts and damages before starting the installation. - Any alterations made to this product and its fittings may infringe the water regulations and will invalidate the guarantee. - We strongly recommend the use of a qualified and registered plumber.
6in.(152mm) 10.25in.(260mm) 15in.(379mm) 29in.(738mm) 6.1in.(155mm) 16.4in.(417mm) Ø1.5 in. .5 in . 14.17in.(360mm) 5.5in. 28.5in.(724mm) 18.5in.(470mm) <12in.(305mm) Ø2. 1in . 20in.
ATTENTION: INSTALLATION FITTINGS NOT INCLUDED. ATENCION: MATERIAL NECESARIO PARA LA INSTALACION NO INCLUIDO. ATTENTION: MATERIEL NECESSAIRE A L’INSTALLATION NON INCLUS. 1 2 -Install the floor screws. -Instale los tornillos de fijacion a suelo. -Installez les vis au sol. 3 -If replacing a toilet, remove the old wax. Wax seal Sello de cera Joint en cire -Si va a reemplazar el inodoro, quite la cera vieja. -En cas de remplacement du W.C., retier l’ancienne cire.
6 -Instale la junta cónica y el kit fijación cisterna como mostrado en la figura. RUBBER GASKET -Install the rubber gasket and fixing tank kit as show in the picture. -Installez le joint en caoutchouc cône et le kit de fixation du réservoir comme montré dans l’image. WASHER/ NUT COMBO 7 - Connect supply. 8 - Install the seat & cover - Conecte el suministro. - Instalar el asiento -Connecter l’alimentation.