Users Manual

Dimensional Drawing
Operating Instruction
Appearance description
The software carried by the product divides into 2 versions: GS (WO platform, provides the secondary
development) and LAN (LAN or offline version, provides the secondary development). Please mark the need
for software version when place the order. Please contact the customer service for another version if
required. For more detailed platform/software instruction manual, please login into the official website to
download or contact the customer services.
POWER
GND+12V
Positive and
negative of power. If
the polarity is put in
opposite position,
the device will not be
booted. The power
adapter requires DC
12-DC 16V,2A
COM PORT
232 TXD 232 RXD
Serial signal output.
Serial communica-
tion TXD wiring end
and RXD wiring end
WG OUT
GND WD0 WD1
Wiegand 26/34 signal
output. Wiegand
signal 0 output end
and 1 output end
IO OUT
NC NO COM
Relay digital signal output.
From left to right are:
normally closed contact
normally open contact
and public end. Connect
the wires according to
specific needs
NETWORK
RJ45-1 RJ45-2 RJ45-3 RJ45-6
Network cable. From left to
right are:
cable TX+, orange and white;
cable TX-, orange;
cable RX-, green and white;
cable RX-, green
No. QuantityName
1 1Host
2 1DC 12V power adapter, green sockets
3 1Support, wall-mount stickers
4
5
1
3
Countersunk screws, L-type hexagon s
crew driver
Expansion pipe, self-tapping screws
6 1Cables
Dear customer,
Thank you for using our product. For better use, please carefully read this instruction. If you have any
issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our
company, including words, pictures and graphics. Without written permission, no unit or individual
shall extract, copy, translate or edit the content in this instruction.
Device introduction
Parts list
Dimensional drawing
Platform/Software
Operating Instruction
Appearance description
Illumination intensity
Position
Height
Steps
Wiring connection
Features
FAQ
Installation
Product description
Warranty description
Product warranty
Parts list
Support
Device
Air-cooling
support
Unit: mm
Instruction
LED filling light
Infrared camera
RGB camera
Infrared filling
light
USB
Card area
Support slot
Cooling fin
RESET
Wiring extension socket
Support screw
hole
(Pictures for reference only, subject to our products)