User's Manual

Device introduction
Parts list
Dimensional drawing
Platform/Software
operating instruction
Appearance description
Illumination intensity
Position
Height
Steps
Wiring connection
Features
FAQ
Installation
Product description
No. QuantityName
1 1Host
2 1Power adapter
3 1Support
4
5
5
3
Tamper key caps & Expansion pipes
Black screws
6 4Sefl-tapping screws
7 1Wall-mounting sticker
8
9
1
1
Certificate
User manual
10 1Hexagon wrench
Parts list
Dimensional drawing
Dear customer:
Thank you for using our product. For better use, please carefully read this instruction. If you have any
issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our
company, including words, pictures and graphics. Without written permission, no unit or individual
shall extract, copy, translate or edit the content in this instruction.
Unit: mm
The software carried by the product divides into 2 versions: WO (WO platform, provides the secondary
development) and LIN (LAN or offline version, provides the secondary development). Please mark the need
for software version when place the order. Please contact the customer service for another version if
required. For more detailed platform/software instruction manual, please login into the official website to
download or contact the customer services.
Platform/Software Operating Instruction
Appearance description
1 / 2
(Pictures for reference only, subject to our products)
RGB camera
Infrared camera
Infrared filling light
Wiegand 26/34 signal
output. Wiegand signal
output 0 output end
and 1 output end
Relay digial signal
output. From left to
right are:
Normally-closed
contact,
normally-open
contact, common wall.
Please connect
according to your own
needs.
Power positive
and negative. If
power is
connected
reversely, the
device will not
start. Power
adapter requires
DC12-DC 12V/2A
87.53
190.00
17.00
Wiring socket
Tamper
button
Instruction
19
17
7 9 11 13 15
20
18
8 10 12 14 16
POWER
RJ45-6
Cable net-port
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
USB interface
Reset button
1 3
2 4
RJ45-3
RJ45-2
RJ45-1
Network signal input
ALARM
-IN1
ALARM
-IN2
Alarm signal input
ALARM INPUT
17 18
19 20
GND
12V
WG OUT
GND GND RS232-TX RS232-RX
COM PORT
RS-232 serial port signal output
NC WDO COM WD1 N0 GND
IO OUT