Technical data

Operation
4-48
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Motor (contd.)
Switching Between Speed Control − Pressure Control
Speed-controlled
Fig. 4-60
Speed Control − Manual Mode
In manual mode the operator has control over the motors. The pump speed
is equal to the setpoint and does not change.
Speed setpoint: 5 min
-1
Example: Increase Pump Speed
Prerequisite: Speed control mode is selected, and the indication lamp next
to key Key-to-line is off.
1. Touch the green field (rpm) (setpoint).
2. Enter setpoint in the input window and confirm with .
3. If necessary, enable pump (indication lamp next to key is
illuminated)
Fig. 4-61
Other Settings
S Speeds (Refer to illustration)
S Touch key Key-to-line so that the LED lights up (Refer to Fig. 4-50)
Fig. 4-62