Technical data

Index Protocols and Communication Data List
B-20
P/N 7135049A
E 2007 Nordson Corporation
VBC_Siemens
Example of Startup with Standard Index Protocol (contd.)
5. When the system is ready for operation, start the motors.
To do this, check the Status of the receive data block, e.g. by cyclically
retrieving bit 0 System ready.
When the system is ready for operation (All temperature channels are
heated, no errors), all motors that were previously enabled can be
started with bit 1 All motors ON (collective enable) in Melter control.
Transmission data block:
Melter control
Bit Position
Command Data index Channel
number
Write data
value
Line speed value for
motor
7 6 5 4 3 2 1 0 1 2 3 4
1 0 0 0 1 1 1 1 6 115 4 180 204 326 ... ...