Technical data

Operation

4-7

P/N 7135049A

E 2007 Nordson Corporation

VBC_Siemens

Initial Startup (contd.)

Set on Control Panel:

3. Basic settings

Fig. 4-5

Touch repeatedly until the starting screen reappears.

Control Panel Setup

NOTE: If the key is touched unintentionally, the following screen appears

on the control panel.

S Reply NO and return to the program.

If YES is confirmed, the PLC begins the operating program again

(restart/reboot). The operator must now wait until a screen appears that

contains a key F8. The key must be pressed so that the starting screen is

displayed again. This takes approx. three to five minutes.

Fig. 4-6

Refer to the manual Touch Panel TP 270 for more information.

S Temperature setpoints (= processing temperatures)

Refer to Overview / T1.

S Undertemperatures / overtemperatures

Refer to Overview / T2.